Joe's Garage
Posted: Sun Dec 03, 2017 3:19 pm
Joe B, this is Joe V. I sent you a PM for contact info. Hope to see you Thursday, 14 December.
Page 2 of 2
Joe's Garage
Posted: Sun Dec 03, 2017 3:46 pm
I don't have any PMs.
Joe's Garage
Posted: Fri Feb 16, 2018 6:36 pm
is Joe doing clutches now?
Joe's Garage
Posted: Sun Feb 18, 2018 1:33 pm
Not doing clutches per say, it is too much heavy work for me. I did assist Joe Vance in changing his clutch, but he was experienced and did all the heavy work.Rpwolf wrote:is Joe doing clutches now?
Joe's Garage
Posted: Thu Apr 19, 2018 3:21 pm
By any chance do any bushings work like a press and what not?
Joe's Garage
Posted: Thu Apr 19, 2018 4:04 pm
Yes I have a press and bushing tools.CaptainSquirts wrote:By any chance do any bushings work like a press and what not?
Joe's Garage
Posted: Sat Apr 28, 2018 5:19 pm
Spinning up some aluminum bits on Joe's lathe. 
This was the caster plate that I made for the Mirage. I misdrilled the center hole and needed to make it larger. As it turned out, this was a much neater and more accurate way to bore that hole, anyway.
Thanks, Joe!
This was the final product:
This was the caster plate that I made for the Mirage. I misdrilled the center hole and needed to make it larger. As it turned out, this was a much neater and more accurate way to bore that hole, anyway.
Thanks, Joe!
This was the final product:
Joe's Garage
Posted: Sat Apr 28, 2018 5:57 pm
Love the action shot.
Joe's Garage
Posted: Sat Apr 28, 2018 6:03 pm
Whoa you guys could sell those!!
Joe's Garage
Posted: Sun Apr 29, 2018 4:57 pm
Yeah, there are tons of people racing Mitsubishi Mirages that will buy those.
Tons!
Tons!
Joe's Garage
Posted: Sun Apr 29, 2018 5:13 pm
https://www.youtube.com/watch?v=n9tk0AFPi5AAScoda wrote:Yeah, there are tons of people racing Mitsubishi Mirages that will buy those.
Tons!
Joe's Garage
Posted: Sun Apr 29, 2018 5:26 pm
Design me a top hat for my coilover that has the camber adjustment with the added positive camber that will fit my coilover and I would buy it. Just saying...AScoda wrote:Yeah, there are tons of people racing Mitsubishi Mirages that will buy those.
Tons!
Joe's Garage
Posted: Sun Aug 19, 2018 9:47 am
Stopped by Joe's garage yesterday. In 6 hours we took 6 arms off the rear, pushed out 12 bushings, installed 12 new bushings and reinstalled everything back up. We ran into trouble with some bushings but he was able to think and find a way to get them removed/installed. Even had to use a torch on one of the bushings. 10/10 would recommend to anyone.
Joe's Garage
Posted: Sun Aug 19, 2018 5:27 pm
Thanks Dan. Wow was it hot.
Joe's Garage
Posted: Tue Aug 28, 2018 2:20 pm
Y'all done beat Joe up too much, he's thinking about "closing" Joe's Garage.
Joe's Garage
Posted: Tue Aug 28, 2018 3:03 pm
Joe helped me install some monoball rear trailing arm bushings on my M3 as well as get an alignment and corner balance. We got the cross weights within 5lbs! Top notch help, knowledge, and company. I would highly recommend his services! Maybe he'd be willing to schedule stuff when it cools down more... It was an absolute scorcher when he helped me earlier in this August heat. Thanks for the help Joe!
Sent from my SM-G930V using Tapatalk
Sent from my SM-G930V using Tapatalk
Joe's Garage - Limited Availability
Posted: Mon Oct 29, 2018 9:02 pm
Hey Joe (great song)
You up for installing some camber plates and doing an alignment on my wrx? Not sure if your'e still in the biz.
You up for installing some camber plates and doing an alignment on my wrx? Not sure if your'e still in the biz.
Joe's Garage - Limited Availability
Posted: Fri Mar 22, 2019 9:55 am
Is Joe still in business? I have a bump steer kit for my Mustang that I'd like to install and I don't have the means to go about the tedious effort of dialing it in. I know he takes the summer months off so I was hoping to squeeze in before the end of March.