Page 4 of 5
Posted: Wed Jan 14, 2009 9:36 am
by WAFlowers
Yep, 2" ball.
I'll PM you Howard's info.
Posted: Wed Jan 14, 2009 10:23 am
by Native
I'll check with SPC and post back.
Posted: Wed Jan 14, 2009 8:47 pm
by Native
Yep. We can leave the trailer there Friday evening. After 5 pm.
Dave, what time should I meet you there with the key?
Posted: Wed Jan 14, 2009 9:23 pm
by Dave-ROR
Native wrote:Yep. We can leave the trailer there Friday evening. After 5 pm.
Dave, what time should I meet you there with the key?
PM me your number, I'll leave work no later than 6PM to head over to Howard's, then get the trailer and drive over.. so I'll call you when I leave work, but I'd guess 7-7:30...
Posted: Wed Jan 14, 2009 9:41 pm
by Native
pee - em sent.
Posted: Thu Jan 15, 2009 8:17 pm
by Native
When I got home this evening there was a message on my answering machine. Someone was asking me about Saturday's event. The connection was bad, so I didn't get a name, or a number, except that it was enough digits to be long-distance.
Kudos to whoever hunted down my home number, which I don't think I've advertised, but whoever you are, I can't call you back...
We still need a volunteer to pick up some marble dust. I'm sending emails to some of the "west-siders."
Posted: Fri Jan 16, 2009 11:56 am
by WAFlowers
Dave, much thanks for stepping up to tow the trailer. That really opens up my Saturday; something that will help me a lot!

Posted: Fri Jan 16, 2009 12:58 pm
by Dave-ROR
WAFlowers wrote:Dave, much thanks for stepping up to tow the trailer. That really opens up my Saturday; something that will help me a lot!

NP.
I'm going to skip the autocross itself tomorrow, but will get to SPC around 4 or so to get the trailer, maybe a little earlier.
I was assigned to cleanup cones, which should be REALLY easy tomorrow, so I should be able to help as needed with that.. I'm hoping to be done with my new plans by 2 so hopefully I can get to the autocross by 3, 4 will be the worst case.
Posted: Fri Jan 16, 2009 1:26 pm
by Native
ok. thanks for the heads up. Bummer you won't make it.
Posted: Fri Jan 16, 2009 1:31 pm
by Loren
Hey, Steve, can you print a stack of course maps for tomorrow? (if you haven't already) However many you think we'll need. I'll bring a couple copies for setup.
7:30am?
Posted: Fri Jan 16, 2009 3:20 pm
by Native
yup.
time sounds fine.
i have run/work groups from jamie, all the reg. stuff., marble dust is got, lunch is ordered, brian K probably won't pick up water etc until that morning, which is fine.
i think we're all set...

Posted: Fri Jan 16, 2009 3:27 pm
by 5speed4dr
I occasionally teach the law enforcement driving course, so I am familiar with how it's set up. I'll volunteer to help put it back together afterward.
maps
Posted: Fri Jan 16, 2009 3:39 pm
by michlong
Loren wrote:Hey, Steve, can you print a stack of course maps for tomorrow? (if you haven't already) However many you think we'll need. I'll bring a couple copies for setup.
7:30am?
will 10 maps do sat next to my printer now... (well i will print them anyway)
is setup starting at 7 or 7.30 i was aiming for 7, will anyone be there?
Posted: Fri Jan 16, 2009 3:42 pm
by Native
7:30 refers to my co-chair.
I'll be there about 7 to open the gate.
the trailer will be there, so the sooner it's unpacked the sooner we can get the show on the road, so to speak.

Posted: Fri Jan 16, 2009 3:44 pm
by michlong
Native wrote:7:30 refers to my co-chair.
I'll be there about 7 to open the gate.
the trailer will be there, so the sooner it's unpacked the sooner we can get the show on the road, so to speak.

7ish it is
Posted: Fri Jan 16, 2009 4:20 pm
by Loren
If someone is really eager, as soon as the trailer is unloaded, grab the chalk spreader, dump it out and clean the crud out of it. It seems it probably got wet and what's in it is all caked and doesn't want to spread.
Remember, DON'T disassemble the LE course tomorrow morning! We're using it as a basis for tomorrow's course.
See y'all about 7:30.
Posted: Fri Jan 16, 2009 4:44 pm
by michlong
Loren wrote:If someone is really eager, as soon as the trailer is unloaded, grab the chalk spreader, dump it out and clean the crud out of it. It seems it probably got wet and what's in it is all caked and doesn't want to spread.
Remember, DON'T disassemble the LE course tomorrow morning! We're using it as a basis for tomorrow's course.
See y'all about 7:30.
yeh got it, looking at the map should be relatively quick to get set up.
Posted: Fri Jan 16, 2009 7:09 pm
by snookwheel
I'll be there pretty early & can give a hand on setting up. No to brag, but I'm a pretty good crud scraper
Scott
Posted: Fri Jan 16, 2009 7:34 pm
by Loren
snookwheel wrote:No to brag, but I'm a pretty good crud scraper
Why does that not surprise me?

Posted: Fri Jan 16, 2009 8:06 pm
by snookwheel
Loren wrote:snookwheel wrote:No to brag, but I'm a pretty good crud scraper
Why does that not surprise me?

Now that's just cold..
